Binding Documents With a Fastback Model FB15xs

If you are looking for a binding machine that is fast, efficient and produces highly professional documents the Fastback 15xs is an excellent choice. The 15-xs is the most popular binding machine produced by Powis Parker. This system is capable of binding documents with just a few sheets or books that are up to 1.5″ thick. And the best thing is that the whole process only takes about fifteen seconds. This article will provide you with simple step by step instructions for binding documents with your Powis Parker 15xs binding machine.

1. Prepare your document for binding by assembling the contents, index tabs and covers in the order that you want them bound.
2. Take the pages of your book in one hand and fan the binding edge of the book block with your other hand. Fanning the pages will help to ensure that the pages aren’t stuck together. It will also help to ensure that the glue from the binding strip makes contact with all of the pages from your report or presentation.
3. Once the pages are ready to be bound, you need to place the pages into the opening of your binding system. The clear plastic book stand attached to your system will help to keep your book upright during the binding process.
4. To start the machine, you need to press the large green button on the front of the machine. This will cause the machine to clamp down on document and will begin the binding cycle.
5. At this point, you will need to look at the LCD display on the right hand side of your binding system. The display will tell you the size of strip that you are going to need to use. Feed the correct size strip into the side of the machine and the binding process will continue.
6. After about fifteen seconds your document will be bound. All that is left to do is to remove the book from the throat of the machine and place it on the cooling rack. In ten to fifteen minutes the document will be cooled and ready to use.

Following these steps it is possible for virtually anyone to bind professional looking documents with the Fastback 15xs binding machine. The process is easy and takes far less time than punch and bind styles such as comb binding, wire binding or coil binding. Plus, your finished documents will look great and are sure to impress potential clients. Try it for yourself today.

Related posts:

1. Binding Documents With Powis Parker Fastback LX-Strips and the Fastback Model 9
2. A Review of the Powis Parker Fastback Model 15xs CP Tape Binding Machine
3. Powis Parker Fastback Model 15xs CP Tape Binding Machine Review
4. Comparing the Powis Parker Fastback Model 15xs and Fastback Model 9
5. Comparing the Powis Parker Fastback Model 9 and Model 15xs
6. Binding Documents With the Powis Parker Fastback Model 11
7. Binding With Powis Parker Fastback Image Strips and the Fastback Model 9
8. How to Bind Documents With the Fastback System